© 2017 by International Chemical Process, 37 Rue d'Amsterdam, 75008 Paris                                                                   

  • @poolsanfrance
  • @poolsan1
  • @poolsan_off
  • Blanc Icône YouTube

0805 14 00 60 (appel gratuit depuis un poste fixe)

CONTACT@POOLSAN.FR

USER GUIDE

1) I Calculate my water volume

A very important step to get the exact pool volume. It has an influence on the dosage of Poolsan Bottle (Sanitiser) and the REGENERATOR (Clarifyier).
 
AVERAGE DEPTH : (MAXIMUM DEPTH + MINIMUM DEPTH) / 2 
Example : (1.80 + 0.80) / 2 = 1.30m
- YOUR POOL IS A RECTANGLE : WIDTH x LENGTH x AVERAGE DEPTH 
Example : 4m x 8m x 1,30m = 42 m3
- YOUR POOL IS OVAL : (WIDTH x LENGTH x AVERAGE DEPTH) x 0.89
Example : 4m x 8m x 1,30m = 42 m3 x 0,89 = 38 m3 (Round up to the last digit number)
- YOUR POOL IS ROUND : (DIAMETER x DIAMETER x AVERAGE DEPTH) x 0.78
Example : 4m x 4m x 1,30m = 21 m3 x 0,78 = 17 m3 (Round up to the last digit number)

2) I CONTROL THE pH

To make the tests, I use the Poolstrips Kit, (included in the kit) or the Pooltester (sold separately). 

I use my usual pH correction product if necessary, ask your installator or reseller. Poolsan is compatible with all pH+ or pH- products in the market. 

I hold the pH level between 7.0 and 7.4 for a efficient and economical water treatment. 

Objectives of this step : 

- To make the treatment efficient

- To improve my swimming experience

- To preserve my equipement and surface

A weekly check with the Poolstrips is recommended to hold a efficient and economical water treatment. 

3) I PREVENT AND CONTROL THE APPEARANCE OF ALGAE AND BACTERIAS  

A) INITIAL DOSE (FIRST OR STARTING DOSE AFTER WINTER TIME)

Open carefully the Poolsan Bottle. To get the desired dose, press on the bottle and the liquid will reach the top tank. 

For the very first use of Poolsan, once the water is analysed, pour a initial dose of Poolsan, in the skimmer or applied equally at the water surface, according to your pool volume. It will bring the COPPER level up to 0.7mg/L (ppm). You can have the dosage board at the back of the kit (STEP 2, Dosage board : "Poolsan Initial Dose") or here : 

Pool Volume = Initial Dose of Poolsan 

1.000 litres (1m3) =   20 ml

2.000 litres (2m3) =   35 ml

3.000 litres (3m3) =   55 ml

5.000 litres (5m3) =   90 ml

10.000 litres (10m3) = 175 ml

15.000 litres (15m3) = 265 ml

20.000 litres (20m3) = 350 ml

30.000 litres (30m3) = 525 ml

40.000 litres (40m3) = 700 ml

50.000 litres (50m3) = 875 ml

60.000 litres (60m3) = 1,050 litres

70.000 litres (70m3) = 1,225 litres

Switching from chlorine to Poolsan is easy as 1, 2, 3 ! 

A weekly check (Copper section on the Poolstrips, the level must be between 0.4 and 0.7 mg/L (PPM)) is recommended to hold a efficient and economical water treatment.

B) WEEKLY DOSE (SECOND DOSE AND OTHERS)

8 Days after date of Initial Dose, analyse the water with the Poolstrips included in the kit (COPPER Section).

 

The Copper Level must be between 0.4 and 0.7 mg/L (PPM). Towards the result on the Poolstrip, increase the level (+0.1 mg/L) by a application of Poolsan according to your pool volume. You can find the doses at the back of the kit (Step 2, Dosage Board : "Increase of 0.1mg/L") or here : 

Pool Volume = Dose of Poolsan 

1.000 litres (1m3) = 2,5 ml

2.000 litres (2m3) = 5,0 ml

3.000 litres (3m3) = 7,5 ml

5.000 litres (5m3) = 12,5 ml

10.000 litres (10m3) = 25,0 ml

15.000 litres (15m3) = 37,5 ml

20.000 litres (20m3) = 50 ml

30.000 litres (30m3) = 75 ml

40.000 litres (40m3) = 100 ml

50.000 litres (50m3) = 125 ml

60.000 litres (60m3) = 150 ml

70.000 litres (70m3) = 175 ml

When using a automation system like POOLSAN DR30 or POOLSAN OXY, refer to the user guide of the device.

A weekly check (Copper section on the Poolstrips, the level must be between 0.4 and 0.7 mg/L (PPM) : The optimal level is 0.6) is recommended to hold a efficient and economical water treatment. Do not overdose.

4) I CLARIFY MY WATER 

Oxidises safely and quickly all the accumulated organic wastes in the pool, for a clear water. 

Open gently the REGENERATOR bag (Water Clarifyier). Use a doser to apply the required quantity (a 50g/50mL spoon is included in the kit). Manipulate the REGENERATOR safely. Pour it equally in the water or in the skimmer. Available for initial and other dosages. 

- Normal Dosage (when the water is not perfectly clear) : If the water temperature is under or equaled to 28 degrees : 15g/m3 (15/1000L). If the water temperature is more than 28 degrees : 20g/m3 (20g/1000L). 

- If the water is green or white : SHOCK TREATMENT : 40g/m3 (40g/1000L). Make sure that your filter is clean and works properly and wait 12 hours. 

To get the precised dose, you have to calculate your pool volume. Once calculated, you have to multiply it by 15, 20 for normal dosage or 40 for a shock treatment. Example : 5m3 x 15g = 75g ; Shock Treatment : 5m3 x 40g = 200g . 

Use REGENERATOR once per week when after you make your analysis with Poolstrips, sanitise the water (bottle). Once every 4 weeks if the pool is not used.   

For a optimal water quality, please make sure that : 

- The pH must be between 7.0 and 7.4. 

- The Copper level must be between 0.4 and 0.7mg/L (PPM)

- The total Alcalinity must be between 80 and 120 PPM

To measure the Active Oxygen MPS level, you can find it on the Poolstrip's box. The level must be between 3.0 and 8.0 mg/L.

Poolsan REGENERATOR is compatible with all TA+, TA-, pH+ and pH- products in the market. 

A weekly check (The level must be between 3.0 and 8.0 mg/L (PPM)) is recommended to hold a efficient and economical water treatment.

HEALTH AND SAFETY 

POOLSAN WATER SANITISER (BOTTLE)

H410 - Very toxic to aquatic life with long lasting effects. 

P102 - Keep out of reach of children.

P280 - Wear eye protection, protective gloves.

P301+P330+P331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing.

Rinse skin with water .

P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove

contact lenses, if present and easy to do. Continue rinsing.

P310 - Immediately call a POISON CENTER or doctor.

P501 - Dispose of contents/container to hazardous or special waste collection point, in

accordance with local, regional, national and/or international regulation.

POOLSAN REGENERATOR (CLARIFYIER BAG)

H302 - Harmful if swallowed

H314 - Causes severe skin burns and eye damage

H412 - Harmful to aquatic life with long lasting effects

P102 - Keep out of reach of children

P262 - Do not get in eyes, on skin, or on clothing

P273 - Avoid release to the environment

P280 - Wear eye protection, face protection, protective clothing, protective gloves

P301+P330+P331 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting

P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing.

Rinse skin with water/shower

P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove

contact lenses, if present and easy to do. Continue rinsing

P308+P313 - IF exposed or concerned: Get medical advice/attention

P501 - Dispose of contents/container to hazardous or special waste collection point, in

accordance with local, regional, national and/or international regulation